فرصت های شغلی شرکت خدمات نفت و گاز Wood PLC در امارات ۱۳۹۹/۱۰/۱۰

فرصت های شغلی شرکت خدمات نفت و گاز Wood PLC در امارات –30 دسامبر 2020:

(برای اطلاعات بیشتر روی عنوان شغلی کلیک نمائید)

PMC Senior Corrosion and Material Engineer

Wood is currently looking for a PMC Senior Corrosion and Material Engineer to work on ADNOC Gas Processing - Ruwais Sulphur Handling Terminal project. The candidate will be required to: - Provide expert input in material and corrosion technology - Prepare and issue engineering corrosion philosophy and corrosion management plans - Advise equipment, valves, and piping material selection based on internal and external corrosion - Prepare material selection reports and perform corrosion rate calculations - Prepare material specifications for pipes, piping components, valves, and mechanical equipment - Provide input to, review and approve material selection diagrams - Review material selection diagrams of vendors, licensors and third - parties - Prepare painting specifications, coating specifications and insulation specifications - Ensure that all produced deliverables are complied with QA / QC and ISO System requirements of the Company

Requisition ID

2020-81556

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitlePMC Senior Planning Engineer

Wood are currently looking to recruit a Senior Planning Engineer to work on ADNOC Gas Processing project - Ruwais Sulphur Handling Terminal based in Abu Dhabi, United Arab Emirates. Successful candidate will perform below responsibilities and duties; - Act as a focal point for engineering discipline leads regarding scheduling and progress issues. - Be particularly diligent in recognizing and reporting to Project Management potential problems in all phases of the project - Ensure that the schedules and systems are integrated to measure, trend and forecast the work, and are in place and managed - Contribute to the change management process, analysing and reporting schedule impacts to the project - Updating the proposal schedule to indicate specific milestones agreed upon in the Contract - Preparing engineering and procurement schedules at varying levels of detail - Assisting with obtaining alignment between Engineering and Procurement Schedules - Delivering of weekly and monthly project reports - Ensuring that Corporate Systems are set up and maintained inline with project schedules - Periodically updating schedules to include scope changes, latest progress and delivery information - Assisting with development of Design Change Notices by highlighting impact on schedule, and assist with related tracking and re-baselining effort - Obtaining deliverables and drawing lists and updates from disciplines and distribute compiled reports - Developing and distribute project curves of progress, cost and manpower, including planned, actual and forecast figures

Requisition ID

2020-81555

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitlePMC Senior Electrical Engineer

Wood is currently looking to recruit PMC Senior Electrical Engineer to join the client team on ADNOC Gas processing - Ruwais Sulphur Handling Terminal project. Successful candidate would responsible for below duties and responsibilities; - Advise PMC core management on issues surrounding future appointments of electrical personnel - Ensure that all PMC Electrical Engineers under his / her supervision work to the project procedures, specifications and standards, good engineering practices and techniques, and any project-specific requirements - Review / Validate detailed design and Engineering Deliverables - Supervise the day to day engineering interfaces between PMC core engineering group, Project Managers and the engineering teams assigned to the EPC package – includes interaction with all other specialist disciplines as required - Participate in Hazard and Operability (HAZOP), Safety Integrity Level (SIL), Project Health, Safety and Environment Review (PHSER) exercises for the EPC projects during detailed engineering Participation in design review, 3D Model Reviews, Value Engineering, Risk Management workshops, constructability Reviews, PHSERs , IPR etc. - Input into engineering procedures and work practices as appropriate, in conjunction with Core Electrical Lead - Carryout Technical Evaluation of Bids, Issue Bid Technical Clarifications, Technical Evaluation Reports and Recommendations - Develop close working relationships between all engineering group members, Project Managers / projects team and EPC staff to ensure a consistent approach and effective resolution of issues - Develop a good team spirit within assigned PMC personnel and encourage team working with the Contractor and other customer groups

Requisition ID

2020-81554

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitlePMC Lead Technical Safety Engineer

Wood is currently looking to recruit PMC Senior HSE Design Engineer to join the client team on ADNOC Gas Processing - Ruwais Sulphur Handling Terminal project. Successful candidate would responsible for below duties and responsibilities; - Supervises, coordinates and directs the Technical Safety discipline work in the preparation of technical reports, technical specifications, drawings and purchase requisitions - Performs safety engineering calculations, using MS Office or specialized software, e.g., risk and consequence calculations, calculations related to flaring and venting, hazardous area classification, firewater demand estimates - Reviews man-hour budget, schedule and project scope for the discipline portion of the work - Prepares Project Change Notices for submittal to the Project Engineering Manager for changes in the scope of work, delays or other reasons and assist in cost estimate of the change - Participates in design reviews (e.g., HAZID and HAZOP). - Prepare client reports / documentation on the project work conducted. This includes philosophies, analysis work, safety engineering calculations, design reviews Performance Standards and specifications. Prepares Formal Safety Assessment studies, prepares Safety Cases (if required) - Coordinates with other Discipline Leads and Project Engineering Manager or Project Engineers to ensure a functional project - Reviews drawings and documents of other Project disciplines at appropriate times to ensure that the drawings are in compliance with the requirements of the project. Conversely, ensures that discipline documents and drawings are submitted for review to other disciplines in time for them to react and feed-back comments before scheduled release dates

Requisition ID

2020-81553

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitlePMC Engineering Manager

Wood is currently looking to recruit PMC Engineering Manager to join the client team on ADNOC Gas Processing - Ruwais Sulphur Handling Terminal project. Successful candidate would responsible for below duties and responsibilities; - Manage the day to day interfacing between assigned projects of the Project Engineers and the disciplines of Process, Piping, Civil / Structural, E&I and Mechanical together with the PMC Construction Team - Identify areas of concern with respect to progress of assigned project, recommend the corrective actions wherever required and execute when directed by the client - Lead, conduct and participate in value engineering workshops for optimizing scope and design - Organize and participate in Hazard and Operability (HAZOP), Safety Integrity Level (SIL), Project Health, Safety and Environment Review (PHSER) and EIA and HSE exercises for the assigned projects during FEED and detailed design to implement the recommendation of such exercises upon client approval - Manage the control of all engineering systems and hardware - Participate in key client reviews and meetings as required - Participate in Project Management Plan reviews - Provide notification of any potential commercial risk or opportunity to the Project Director / Manager for further action - Develop a good team spirit within assigned PMC personnel and encourage team working with the Contractor and client

Requisition ID

2020-81552

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitlePMC Senior Rotating Equipment Engineer

Wood is currently looking to recruit a PMC Senior Rotating Equipment Engineer to join the client team on ADNOC Gas Processing project. Successful candidate would responsible for below duties and responsibilities; - Review and verification of equipment supplier’s engineering - Assist with specification and selection of suitable rotating machinery - Review of Equipment Technical Material Requisition (Specifications), such as Specification and Mechanical Data Sheets, for Enquiry - Technical evaluation, comparison and clarification of supplier technical bids, plus the technical reports to support order placement - Review of Process Data Sheets and Supplier documentation for integration within Review of Vendor documents as GA / Details / Calculations Procedures - Project technical support – familiarity with risk assessments, design reviews, constructability, HAZOP, etc. - Plan and monitor execution of equipment aspects of projects

Requisition ID

2020-81551

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitlePMC Senior Static Equipment Engineer

Wood is currently looking to recruit a PMC Senior Static Equipment Engineer to join the client team on ADNOC Gas Processing project. Successful candidate would responsible for below duties and responsibilities; - Review and verification of equipment supplier’s engineering, as well as the testing and commissioning of equipment - Assist with specification and selection of suitable static machinery, plus testing and commissioning of suitable equipment - Review of Equipment Technical Material Requisition (Specifications), such as Specification and Mechanical Data Sheets, for Enquiry - Technical evaluation, comparison and clarification of supplier technical bids, plus the technical reports to support order placement - Review of Process Data Sheets and Supplier documentation for integration within Review of Vendor documents as GA / Details / Calculations Procedures - Project technical support – familiarity with risk assessments, design reviews, constructability, HAZOP, etc. - Plan and monitor execution of equipment aspects of projects

Requisition ID

2020-81550

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitlePMC Senior Process Engineer - Sulphur granulation

Wood is currently looking to recruit a PMC Senior Process Engineer to join the client team on a ADNOC Gas Processing. Successful candidate would responsible for below duties and responsibilities; - Provide technical expertise on all engineering subject matter pertaining to Process engineering and design - Ensure Process design and engineering compliance with relevant codes, standards and Company standards - Coordinate, Monitor and handle Process design and engineering with EPC contractor as per project expectation and complete the same within the time frame - Perform regular and timely technical reviews of Process engineering deliverables developed by engineering consultants / contractors, ensuring design quality in compliance with relevant codes, standards, and best practices - Ensure integration of overall Process engineering coordination within IPMT other discipline Engineering Team - Review and approval of Engineering Consultant's and EPC Contractor's work and ensure compliance with the project specifications, relevant codes and standards, and best industry practices - Coordinate the required engineering participation in the development and analysis of various design options and business models - Contribute input and expertise in the development and analysis of various design options and business models to design optimization and validation - Participate in teams for equipment sizing / equipment selection considering optimization and standardization - Ensure that the facilities are designed in accordance with the latest corporate guidelines with respect to environment and health aspects - Ensure full utilization of the existing facilities while optimizing the facilities required for the new projects - Participate in layout reviews, model review, design reviews, and technical workshops - Provide technical assistance and coordination with other discipline engineers - Coordinate technical reviews and bid evaluation, and performance evaluation

Requisition ID

2020-81549

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitleMaterials Engineer (Instrumentation, control & Electrical)

Wood is currently looking for a Materials Engineer (Instrumentation, control & Electrical) to join our team in Abu Dhabi. This position is to support one of our projects in Abu dhabi for 6 months contract. - Identification of Existing spares in company CMMS and link to assets. - Identification of technical documents / data from various re-sources (Document server - EDMS / Site / vendor / Manufacturer / project team / Discipline engineers) and carryout spares registration and Asset link. - Carryout Spares registration in CMMS based on the Spare parts interchangeability record (SPIR) and Technical documents as per company policies & procedures. - Transform or provide materials / asset data as per company required format. - Link technical documents and Spares (Bill of materials) to assets / CMMS. - Support and co-ordinate with all stakeholders such as end users / Site personnel / vendor / Manufacturer / project team / Discipline engineers / procurement division for smooth completion of jobs. - Initiate amendments in the CMMS to update specification / data as and when required. - Provide reports on Materials creation and CMMS updation status to management on regular basis.

Requisition ID

2020-81526

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitleMaterials Engineer (Mechanical – Rotating & Static)

Wood is currently looking for a Materials Engineer (Mechanical – Rotating & Static) to join our team in Abu Dhabi. This position is to support one of our projects in Abu dhabi for 6 months contract. - Identification of Existing spares in company CMMS and link to assets. - Identification of technical documents / data from various re-sources (Document server - EDMS / Site / vendor / Manufacturer / project team / Discipline engineers) and carryout spares registration and Asset link. - Carryout Spares registration in CMMS based on the Spare parts interchangeability record (SPIR) and Technical documents as per company policies & procedures. - Transform or provide materials / asset data as per company required format. - Link technical documents and Spares (Bill of materials) to assets / CMMS. - Support and co-ordinate with all stakeholders such as end users / Site personnel / vendor / Manufacturer / project team / Discipline engineers / procurement division for smooth completion of jobs. - Initiate amendments in the CMMS to update specification / data as and when required. - Provide reports on Materials creation and CMMS updation status to management on regular basis.

Requisition ID

2020-81525

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitlePMC Senior Civil and Structural Engineer

Wood is currently recruiting for a PMC Senior Civil and Structural Engineer with extensive experience in the oil and gas industry to work on ADNOC Gas Processing project. Successsful candidate will be responsible for below duties; - Work independently in the group and lead Civil and structural Design Engineers and work in a team of engineering and design office - Apply experience, engineering techniques, codes, standards, analysis calculations, specification, company procedures, sound judgment, and design criteria to conduct his work - Ensure that all civil and structural works done at company are per approved specifications - Prepare quality assurance and control documents for civil / structural jobs - Field inspection of work activities, surveying and measurement taking - Act Lead Engineer for civil / structural related projects / jobs - Prepare drawings for design and produce himself in electronic format. Also, if work load increases, he shall produce sketches to allow designers / draft men to draw on electronic format, he will then verify the drawings - Work directly with project engineers, designers, CAD operators, and draft men to ensure work activities are coordinated. He may also be required to supervise and train these personnel - Use software related to civil / structural for design, calculations and preparation of design packages (i.e., Staadpro) - Responsible in planning and conducting independent work requiring judgment in the evaluation, selection, application and adaptation of engineering techniques, procedures and criteria - Devise new approaches to problems, and prepare or modify drawings, specifications, calculations, charts and graphs, and monitor work for compliance to applicable codes, accepted engineering practices

Requisition ID

2020-81434

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitlePMC Senior Piping Engineer

Wood is currently looking to recruit PMC Senior Piping Engineer to join the client team on ADNOC Gas Processing project. Successful candidate would responsible for below duties and responsibilities; - Support the preparation and implementation of effective project execution plans & procedures - Monitor engineering design compliance to the Design Basis - Manage a defined project scope to schedule and budget - Coordinate cross discipline input into procurement and contract technical packages assigned to their area - Monitor design evolution from basic engineering to detail engineering for documents and drawings and mitigate interdisciplinary conflicts - Provide Area Managers with monthly progress and performance write-ups for their area for inclusion in the Project Monthly report - Review pipeline and piping design basis and ensure its full compliance with project specification and Scope of Work - Review the stress analysis of Pipeline systems through the use of Caesar II / Auto PIPE or equivalent software and review of stress analysis reports, incorporating project specifications and international codes - Resolve design irregularities. Monitor the transfer of Pipeline loads to Civil Discipline, coordinate on technical issues as required

Requisition ID

2020-81433

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitlePMC Senior Instrument and Control Engineer

Wood is currently recruiting for a PMC Senior Instrument and Control Engineer with extensive experience in the oil and gas industry to be based on ADNOC Gas Processing project. Successful candidate will be responsible for below duties; - Design and check all Instrument work on assigned projects - Execute assigned work in accordance with the applicable Project Procedures, DDI and Standards, including Project Procedures on Safety and Quality Control, within the man-hour and cost budgets and the project schedule targets - Prepare instrument index - Develop data sheets, instrument sizing, and prepare material requisitions for all instrument items including Control Valves, Relief Valves, Flow elements, Level instruments, Temperature instruments, Analyzers and DCS / ESD / Fire and Gas systems - Review other discipline drawings such as Equipment datasheet - Guide the designers for the preparation of Instrumentation drawings and deliverables - Prepare and check all Instrument drawings / documents and ensure that the quality of design and drawings produced for enquiry and fabrication purposes is of satisfactory standard - Attend coordination meetings and engineering review meetings with supplier as required - Assist Procurement Department with the expediting of supplier documents - Review and approve supplier documents for Instrumentation - Ensure effective & efficient Inter-discipline coordination including coordination with client engineer - Review instrument aspects of package unit supplier’s drawings

Requisition ID

2020-81432

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitleSenior Construction Engineer / Materials Controller

Wood is currently recruiting for a Senior Construction Engineer (Piping/Structural) / Material Controller to strengthen our team. - Supports and promotes all areas of HSE criteria with the In-Country Counter-parts (Coordinate with Out-of-Country HSE Management) - Supports both the Construction Manager and the Lead Construction Engineer on all ongoing aspects of the project - Continually informs/appraises the Lead Construction Engineer for overall status, progress and constraints - Coordinates all aspects of the project for timely deliverables throughout - Performs site visits as required (Liaise with Client representation) as well as WOOD site based operatives - Interfacing with Engineering, Supply Chain and project controls on a daily basis - Supports the Lead Construction Engineer on scheduled based detail (also liaise with Projects control division) - Interact with Client, engineering and site based personnel on the required Constructability reviews and Readiness reviews - Liaise closely with the relevant Workpack engineers for timely formulation/Issuance of progressive work-packs - Implement and maintain a philosophy of continuous improvement for both quality and ‘Cost’ improvement - Attend / chair - daily weekly meetings as required - Work with Projects and Contracts divisions to monitor any Variations to scope - Review with engineering for any areas of ‘cost-saving’ possibilities - Provide constructability input to designs - Coordinate with Lead Field Engineer on all aspects of ongoing workface activities - Identify and advise on Specialist Vendor Support, Tools and Equipment required to implement scope - Assist with construction input to ensure awareness and understanding of the various scopes of work - Working in a team environment - Involved in Effective Change Management - Liaise closely with Wood team In country - Assist in the coordination of required timely Constructability reviews, in line with Model progression - Drive through the required Constructability Readiness reviews for being addressed to suit the work-pack deliverable timing - Liaise strongly with site materials division for materials and equipment deliverables for alignment to the overall project schedules - Participate in HSE improvement activities, promoting HSE elements throughout Work as being progressed and installed - Full working knowledge of construction activities in relation to Civil and Piping disciplines - Assist with lessons learnt & addressing same for feedback and areas of action as required (Offer solutions and observations as required) - Ability to review engineering design drawings

Requisition ID

2020-81412

Multi-Locations

Country

United Arab Emirates

City

Dubai

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitleLead Civil / Structural Engineer

Wood is looking for a Lead Civil / Structural Engineer to strengthen our team in Dubai o - Technical Assurance (engineering quality assurance and control) - Resource management - Standardization and replication across the Contract - To manage the Civil / Structural engineering and design team - To have single-point responsibility for all civil/structural engineering deliverables and ensure that they conform to all applicable engineering codes and standards as well as the Client’s policies and procedures - To ensure that the overall project is delivered to meet the asset operational needs - To provide direction and guidance on all technical queries relating to civil / structural engineering - To participate in all project safety and design reviews as necessary - To ensure that all work is completed without compromise to quality and is delivered according to the project schedule - To liaise with the Client’s Engineering, Operations and Maintenance staff as required to ensure a consistent approach to project completion - To promote safe behaviour at all times - To provide sound technical advice and solutions to a diversity of technical problems within the discipline - To co-ordinate with other disciplines during all stages of design development, construction, pre-commissioning, and start-up - To provide technical support to site as required - To assist in the coordination of all activities related to Civil / Structural engineering and design - To identify any areas of concern with respect to progress and/or quality and recommend corrective actions as required - To attend weekly progress meetings and generate status reports for the Engineering / Project Manager

Requisition ID

2020-81250

Multi-Locations

Country

United Arab Emirates

City

Dubai

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitleLead Technical Safety Engineer

Wood is currently looking for an Lead Technical Safety Engineer to strengthen our team in Dubai. - Technical Assurance (engineering quality assurance and control) - Resource management - Standardization and replication across the Contract - Contributing to the delivery of Engineering excellence through achieving project completion to the project specifications on schedule - Being accountable for the quality of Technical Safety deliverables - Providing Technical Safety guidance to the team - Supporting and supervising task delegation to team - Participating in audits and incident investigations as required - Executing assigned scopes of work - Supporting and supervising task delegation to team - Providing discipline expertise to the business - Participating in project HAZOP, HAZID, SIL studies, and other safety workshops when required - Providing sound technical advice and solutions to a diversity of technical problems within the discipline - Co-ordinating with other disciplines during all stages of design development, construction, pre-commissioning, and start-up - Providing technical support to site as required - Manage Technical Safety discipline team - Ensure that all project Health, Safety and Environmental policies are complied with - Ensure that design meets all Technical Safety requirements and maintains risks to as low as reasonably practicable - Participate in audits and incident investigations as required - Actively maintains own competence according to standards and pursues continuous professional development - Self-awareness of relevant regulatory framework, legislation changes, initiatives and industry technology developments - Expert knowledge and understanding of the fundamentals of Technical Safety engineering methodologies, software systems, and design practices as they relate to FEED, Detail Design, Construction, Commissioning, and plant Start-up - Expert awareness of international codes and standards - Expert knowledge of design deliverables associated with loss prevention scopes - Experience of coordinating HAZOP, HAZID, SIL Classification studies - Experience of directing Management of Change (MOC) reviews - Able to perform Physical Hazard Effects (PHE) modelling as required - Able to interrogate and review and perform Quantitative Risk Assessments (QRA) as required

Requisition ID

2020-81249

Multi-Locations

Country

United Arab Emirates

City

Dubai

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitleLead Process Engineer

Wood is looking for a Lead Process Engineer to strengthen our team in Dubai. - Technical Assurance (engineering quality assurance and control) - Resource management - Standardization and replication across the Contract - Reporting to the Engineering Manager the candidate will assume sole responsibility for the project process systems - To manage the Process engineering and design team - To have single-point responsibility for all process engineering deliverables and ensure that they conform to all applicable engineering codes and standards as well as the Client’s policies and procedures - To ensure that the overall project is delivered to meet the asset operational needs - To provide direction and guidance on all technical queries relating to process engineering - To participate in all project safety and design reviews as necessary - To ensure that all work is completed without compromise to quality and is delivered according to the project schedule - To liaise with the Client’s Engineering, Operations and Maintenance staff as required to ensure a consistent approach to project completion - To promote safe behaviour at all times - To provide sound technical advice and solutions to a diversity of technical problems within the discipline - To co-ordinate with other disciplines during all stages of design development, construction, pre-commissioning, and start-up - To provide technical support to site in terms of material inspection, Factory Acceptance Testing etc - To assist in the coordination of all activities related to process systems - To identify any areas of concern with respect to progress and/or quality and recommend corrective actions as required - To attend weekly progress meetings and generate status reports for the Engineering/Project Manager

Requisition ID

2020-81248

Multi-Locations

Country

United Arab Emirates

City

Dubai

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitleLead PACO Engineer

Wood is currenly recruiting for a Lead Instrument Engineer to strengthen our team in Dubai. - Technical Assurance (engineering quality assurance and control) - Resource management - Standardization and replication across the Contract - This is a Home Office position based in Dubai, but it may involve occasional visits to the Client offices and/or site in Iraq - Reporting to the Engineering Manager engineer the candidate will assume sole responsibility for assigned Instrument and Controls engineering work scopes - To carry out Instrument and Controls discipline work within a project team, supporting the project team for field development of oil and gas production facilities - To plan, budget, organize, and control a segment of the Instrument and Controls engineering deliverables for the project - To prepare Instrument and Controls deliverables for all project Phases the oil and gas industry - To ensure that all work is completed without compromise to quality and is delivered according to the project schedule - To provide direction and guidance on all Instrument and Controls engineering technical queries raised by either internal or external parties - To liaise with the Client’s Engineering, Operations and Maintenance staff as required to ensure a consistent approach to project completion - To promote safe behaviour at all times - To provide sound technical advice and solutions to a diversity of technical problems within the discipline - To co-ordinate with other disciplines during all stages of design development, construction, pre-commissioning, and start-up - To assist in the coordination of all activities related to Instrument and Controls engineering design - To identify any areas of concern with respect to progress and/or quality and recommend corrective actions as required - Thorough knowledge and understanding of the fundamentals of Instrument and Controls engineering design and analysis - Thorough awareness of relevant international codes and standards - Familiar with the typical software packages that are used for Instrument and Controls engineering design - Experience of the application of HAZOP, HAZID and SIL Rating to Instrument and Controls design - Experience with Instrument and Controls design for prefabricated modular packaged equipment - Experience with Concept Selection and FEED studies

Requisition ID

2020-81247

Multi-Locations

Country

United Arab Emirates

City

Dubai

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitleLead Electrical Engineer

Wood is currently looking for a Lead Electrical Engineer to strengthen our team in Dubai. - Technical Assurance (engineering quality assurance and control) - Resource management - Standardization and replication across the Contract - Reporting to Engineering Manager, the candidate will assume sole responsibility for the project electrical systems on a all assets - To manage the Electrical engineering and design team - To have single-point responsibility for all electrical engineering deliverables and ensure that they conform to all applicable engineering codes and standards as well as the Client’s policies and procedures - To provide direction and guidance on technical queries relating to electrical engineering - To participate in all project safety and design reviews as necessary - To ensure that all work is completed without compromise to quality and is delivered according to the project schedule - To liaise with the Client’s Engineering, Operations and Maintenance staff as required to ensure a consistent approach to project completion - To promote safe behaviour at all times - To provide sound technical advice and solutions to a diversity of technical problems within the discipline - To co-ordinate with other disciplines during all stages of design development, construction, pre-commissioning, and start-up - To provide technical support to site in terms of material inspection, Factory Acceptance Testing etc - To assist in the coordination of all activities related to electrical systems - To identify any areas of concern with respect to progress and/or quality and recommend corrective actions as required - To attend weekly progress meetings and generate status reports for the Engineering/Project Manager

Requisition ID

2020-81245

Multi-Locations

Country

United Arab Emirates

City

Dubai

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitleLead Mechanical Static Engineer

Wood is looking for a Lead Mechanical Static Engineer to strengthen our team in Dubai. Job Responsibilities: - Technical Assurance (engineering quality assurance and control) - Resource management - Standardization and replication across the Contract - To lead and manage the mechanical engineering and design of Rotating and Static package equipment, involves rehabilitation, green and brown field engineering. - To have single-point responsibility for all Mechanical Rotating and Static package equipment deliverables and ensure that they conform to all applicable engineering codes and standards as well as the Client’s policies and procedures. - To ensure that the overall project is delivered to meet the asset operational needs - To provide direction and guidance on all technical queries relating to process engineering. - To participate in all project safety and design reviews as necessary. - To ensure that all work is completed without compromise to quality and is delivered according to the project schedule - To liaise with the Client’s Engineering, Operations and Maintenance staff as required to ensure a consistent approach to project completion - To promote safe behaviour at all times. - To provide sound technical advice and solutions to a diversity of technical problems within the discipline - To co-ordinate with other disciplines during all stages of design development, construction, pre-commissioning, and start-up. - To provide technical support to site in terms of material inspection, Factory Acceptance Testing, etc. - To assist in the coordination of all activities related to rotating and static equipment packages. - To identify any areas of concern with respect to progress and/or quality and recommend corrective actions as required. - To attend weekly progress meetings and generate status reports for the Lead Mechanical Engineer /Project Manager.

Requisition ID

2020-81244

Multi-Locations

Country

United Arab Emirates

City

Dubai

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Lead Mechanical Rotating Engineer

Wood is currenly recruiting for a Lead Mechanical Rotating Engineer to strengthen our team in Dubai. Job Responsibilities: - Technical Assurance (engineering quality assurance and control) - Resource management - Standardization and replication across the Contract - Lead and manage the mechanical engineering and design of Rotating and Static package equipment, involves rehabilitation, green and brown field engineering. - Single-point responsibility for all Mechanical Rotating and Static package equipment deliverables and ensure that they conform to all applicable engineering codes and standards as well as the Client’s policies and procedures. - Ensure that the overall project is delivered to meet the asset operational needs - Provide direction and guidance on all technical queries relating to process engineering. - Participate in all project safety and design reviews as necessary. - Ensure that all work is completed without compromise to quality and is delivered according to the project schedule - Liaise with the Client’s Engineering, Operations and Maintenance staff as required to ensure a consistent approach to project completion - To promote safe behaviour at all times. - Provide sound technical advice and solutions to a diversity of technical problems within the discipline - Co-ordinate with other disciplines during all stages of design development, construction, pre-commissioning, and start-up. - Provide technical support to site in terms of material inspection, Factory Acceptance Testing, etc. - Assist in the coordination of all activities related to rotating and static equipment packages. - Identify any areas of concern with respect to progress and/or quality and recommend corrective actions as required. - Attend weekly progress meetings and generate status reports for the Engineering Manager

Requisition ID

2020-81243

Multi-Locations

Country

United Arab Emirates

City

Dubai

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitleGIS Engineer

Wood is currently looking for GIS Engineer to be worked on our PMC project with TAPI in Dubai. The succesfull candidate will be responsible for the following; - Have strong knowledge in spatial analysis. - Perform DTM management and expert knowledge in ArcGIS , 3D analyst and spatial analyst. - Perform desktop route delineation for pipeline projects using GIS data like ortho imagery, DTM and Vector maps. - Preparation of reports for desktop studies, data management and accuracy assessment. - Perform site survey and collect data from field using GPS, measuring tapes and satellite image. - Carry out study and design work utilising GIS and spatial database technologies, applying Wood and Client design methods, standards and data, to a high quality and in accordance with Project requirements. - Strong knowledge of map projection and coordinate transformation - Knowledge of linear referencing. - Knowledge of image processing and triangulation adjustments - Knowledge of supervised and unsupervised image classification techniques. - Knowledge of pipeline alignment sheets and crossing drawings - Understanding of oil spill modelling - Knowledge of pipeline data models. - Ensure that Wood and Client’s Health and Safety, Environmental and Quality Management Procedures are complied with - Provide GIS assistance and capabilities to other disciplines, and participate in review meetings, in accordance with Project requirements. - Develop, review, and take responsibility for the accuracy of deliverables to which assigned - Ensure that work is checked (including self-check) and appropriately approved, and is completed within schedule and budget - Be vigilant for, and advise respective Wood Manager, of any deficiencies and possible improvements to the established Wood design methods, standards and data and of possible fields for technical investigations, developments and computer programs - Support internal development and continuous improvement activities as required. - Keep informed, by reasonable means, of technical developments in GIS and in the Oil and Gas industry and make recommendations to respective Wood Manager on methods of improving Wood competitive position from a technical standpoint.

Requisition ID

2020-81125

Multi-Locations

Country

United Arab Emirates

City

Dubai

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitleSenior Piping Engineer

Wood is currently looking for a Senior Piping Engineer to support upcoming projects in Dubai with possible trip to Iraq. - Reporting to the Lead Piping Engineer, the candidate will assume sole responsibility for assigned piping engineering work scopes - To carry out Piping discipline work within a project team, supporting the project team for field development of oil & gas production facilities - To plan, budget, organize, and control a segment of the Piping engineering deliverables for the project - To prepare Piping deliverables for a project n the oil and gas industry, and ensure that they conform to all applicable engineering codes and standards as well as the Client’s policies and procedures - To ensure that all work is completed without compromise to quality and is delivered according to the project schedule - To provide direction and guidance on all piping engineering technical queries raised by either internal or external parties - To liaise with the Client’s Engineering, Operations and Maintenance staff as required to ensure a consistent approach to project completion - To promote safe behaviour at all times - To provide sound technical advice and solutions to a diversity of technical problems within the discipline - To co-ordinate with other disciplines during all stages of design development, construction, pre-commissioning, and start-up. - To assist in the coordination of all activities related to piping engineering design - To identify any areas of concern with respect to progress and/or quality and recommend corrective actions as required - Thorough knowledge and understanding of the fundamentals of piping engineering design and analysis - Thorough awareness of relevant international codes and standards - Familiar with the typical software packages that are used for piping engineering design - Experience with piping design for prefabricated modular packaged equipment

Requisition ID

2020-81102

Multi-Locations

Country

United Arab Emirates

City

Dubai

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitlePMC Project Manager

Wood has a fantastic opportunity for a PMC Project Manager to join ADNOC Project Management team in Abu Dhabi. This is an excellent leadership opportunity for an individual with the right experience, looking to take the next step in their career journey. The successful candidate would be responsible of the following; This position is based at site working 60 hrs / week for 6 days per week. - Develop and maintain effective working practices for the Wood project management team - Provide, with full responsibility and accountability, leadership and excellence in the achievement of coordinating both technical and governance through the Stages of the Project - Coordinated site supervision work, manage various contractors, and monitor progress of work - Oversaw all critical developments of project master program, including establishment of milestones and phasing - Ensured compliance with technical specifications and approving quality of main construction materials as per standards - Implemented HSE and monitoring adherence to safety standards and satisfactory work practices - Take full technical and commercial responsibility for execution of the contract in all matters covered within the terms of the contract (from initial contract review to project close-out) - Identify and communicate project team objectives in accordance with the contract terms, scope of work and corporate policy - Organize the project team, define individual responsibilities and motivate team members towards successful achievement of specified project goals, particularly through regular project meetings - Delegate work to the project team members in a manner that encourages individual responsibility - Provide guidance to internal and external stakeholders during project execution to meet project objectives - Oversee different contracting parties, owners, customers, government bodies and existing facilities in coordination - Manage complicated issues among different project phases and the existing facilities - Provide leadership and management for the PMT and EPC to ensure safe, cost effective and timely resolution of all interfaces - Be exposed to different cultures, backgrounds and environments. Attend to and resolve conflicts, challenges and problems related to a large multi-cultural and multi-discipline technical workforce - Review / Validate detailed design and Engineering Deliverables - Participation in design review, 3D Model Reviews, Value Engineering, Risk Management workshops, constructability Reviews, PHSERs , IPR etc. - Carryout Technical Evaluation of Bids, Issue Bid Technical Clarifications, Technical Evaluation Reports and Recommendations - Review and approve project ‘’ AS BUILT’’ and project Design Dossier prepared by EPC Contractor

Requisition ID

2020-80967

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitlePMC Senior Static Equipment Engineer

Wood is currently looking to recruit a PMC Senior Static Equipment Engineer to join the client team on ADNOC Gas Processing - Sales Gas Network FEED project. Successful candidate would responsible for below duties and responsibilities; - Review and verification of equipment supplier’s engineering, as well as the testing and commissioning of equipment - Assist with specification and selection of suitable static machinery, plus testing and commissioning of suitable equipment - Review of Equipment Technical Material Requisition (Specifications), such as Specification and Mechanical Data Sheets, for Enquiry - Technical evaluation, comparison and clarification of supplier technical bids, plus the technical reports to support order placement - Review of Process Data Sheets and Supplier documentation for integration within Review of Vendor documents as GA / Details / Calculations Procedures - Project technical support – familiarity with risk assessments, design reviews, constructability, HAZOP, etc. - Plan and monitor execution of equipment aspects of projects

Requisition ID

2020-80961

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitlePMC Senior Civil Engineer

Wood is currently recruiting for a PMC Senior Civil Engineer with extensive experience in the oil and gas industry to work on ADNOC Gas Processing - Sales Gas Network FEED project. Successsful candidate will be responsible for below duties; - Work independently in the group and lead Civil and structural Design Engineers and work in a team of engineering and design office - Apply experience, engineering techniques, codes, standards, analysis calculations, specification, company procedures, sound judgment, and design criteria to conduct his work - Ensure that all civil and structural works done at company are per approved specifications - Prepare quality assurance and control documents for civil / structural jobs - Field inspection of work activities, surveying and measurement taking - Act Lead Engineer for civil / structural related projects / jobs - Prepare drawings for design and produce himself in electronic format. Also, if work load increases, he shall produce sketches to allow designers / draft men to draw on electronic format, he will then verify the drawings - Work directly with project engineers, designers, CAD operators, and draft men to ensure work activities are coordinated. He may also be required to supervise and train these personnel - Use software related to civil / structural for design, calculations and preparation of design packages (i.e., Staadpro) - Responsible in planning and conducting independent work requiring judgment in the evaluation, selection, application and adaptation of engineering techniques, procedures and criteria - Devise new approaches to problems, and prepare or modify drawings, specifications, calculations, charts and graphs, and monitor work for compliance to applicable codes, accepted engineering practices

Requisition ID

2020-80960

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitlePMC Senior Electrical Engineer

Wood is currently looking to recruit PMC Senior Electrical Engineer to join the client team on ADNOC Gas processing - Sales Gas Network FEED project. Successful candidate would responsible for below duties and responsibilities; - Advise PMC core management on issues surrounding future appointments of electrical personnel - Ensure that all PMC Electrical Engineers under his / her supervision work to the project procedures, specifications and standards, good engineering practices and techniques, and any project-specific requirements - Review / Validate detailed design and Engineering Deliverables - Supervise the day to day engineering interfaces between PMC core engineering group, Project Managers and the engineering teams assigned to the EPC package – includes interaction with all other specialist disciplines as required - Participate in Hazard and Operability (HAZOP), Safety Integrity Level (SIL), Project Health, Safety and Environment Review (PHSER) exercises for the EPC projects during detailed engineering Participation in design review, 3D Model Reviews, Value Engineering, Risk Management workshops, constructability Reviews, PHSERs , IPR etc. - Input into engineering procedures and work practices as appropriate, in conjunction with Core Electrical Lead - Carryout Technical Evaluation of Bids, Issue Bid Technical Clarifications, Technical Evaluation Reports and Recommendations - Develop close working relationships between all engineering group members, Project Managers / projects team and EPC staff to ensure a consistent approach and effective resolution of issues - Develop a good team spirit within assigned PMC personnel and encourage team working with the Contractor and other customer groups

Requisition ID

2020-80958

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitlePMC Senior Piping Engineer

Wood is currently looking to recruit PMC Senior Piping Engineer to join the client team on ADNOC Gas Processing - Sales Gas Network FEED project. Successful candidate would responsible for below duties and responsibilities; - Support the preparation and implementation of effective project execution plans & procedures - Monitor engineering design compliance to the Design Basis - Manage a defined project scope to schedule and budget - Coordinate cross discipline input into procurement and contract technical packages assigned to their area - Monitor design evolution from basic engineering to detail engineering for documents and drawings and mitigate interdisciplinary conflicts - Provide Area Managers with monthly progress and performance write-ups for their area for inclusion in the Project Monthly report - Review pipeline and piping design basis and ensure its full compliance with project specification and Scope of Work - Review the stress analysis of Pipeline systems through the use of Caesar II / Auto PIPE or equivalent software and review of stress analysis reports, incorporating project specifications and international codes - Resolve design irregularities. Monitor the transfer of Pipeline loads to Civil Discipline, coordinate on technical issues as required

Requisition ID

2020-80956

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitlePMC Senior HSE Design Engineer

Wood is currently looking to recruit PMC Senior HSE Design Engineer to join the client team on ADNOC Gas Processing - Sales Gas Network FEED project. Successful candidate would responsible for below duties and responsibilities; - Supervises, coordinates and directs the Technical Safety discipline work in the preparation of technical reports, technical specifications, drawings and purchase requisitions - Performs safety engineering calculations, using MS Office or specialized software, e.g., risk and consequence calculations, calculations related to flaring and venting, hazardous area classification, firewater demand estimates - Reviews man-hour budget, schedule and project scope for the discipline portion of the work - Prepares Project Change Notices for submittal to the Project Engineering Manager for changes in the scope of work, delays or other reasons and assist in cost estimate of the change - Participates in design reviews (e.g., HAZID and HAZOP). - Prepare client reports / documentation on the project work conducted. This includes philosophies, analysis work, safety engineering calculations, design reviews Performance Standards and specifications. Prepares Formal Safety Assessment studies, prepares Safety Cases (if required) - Coordinates with other Discipline Leads and Project Engineering Manager or Project Engineers to ensure a functional project - Reviews drawings and documents of other Project disciplines at appropriate times to ensure that the drawings are in compliance with the requirements of the project. Conversely, ensures that discipline documents and drawings are submitted for review to other disciplines in time for them to react and feed-back comments before scheduled release dates

Requisition ID

2020-80953

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitlePMC Senior Planning Engineer

Wood are currently looking to recruit a PMC Senior Planning Engineer to work on ADNOC Gas Processing - Sales Gas Network FEED project based in Abu Dhabi, United Arab Emirates. Successful candidate will perform below responsibilities and duties; - Act as a focal point for engineering discipline leads regarding planning and progress issues. - Be particularly diligent in recognizing and reporting to Project Management potential problems in all phases of the project - Ensure that the schedules and systems are integrated to measure, trend and forecast the work, and are in place and managed - Contribute to the change management process, analysing and reporting schedule impacts to the project - Updating the proposal schedule to indicate specific milestones agreed upon in the Contract - Preparing engineering and procurement schedules at varying levels of detail - Assisting with obtaining alignment between Engineering and Procurement Schedules - Delivering of weekly and monthly project reports - Ensuring that Corporate Systems are set up and maintained inline with project schedules - Periodically updating schedules to include scope changes, latest progress and delivery information - Assisting with development of Design Change Notices by highlighting impact on schedule, and assist with related tracking and re-baselining effort - Obtaining deliverables and drawing lists and updates from disciplines and distribute compiled reports - Developing and distribute project curves of progress, cost and manpower, including planned, actual and forecast figures

Requisition ID

2020-80952

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitlePMC Senior Pipeline Engineer

Wood are currently recruiting for a PMC Senior Pipeline Engineer to work on ADNOC Gas Processing - Sales Gas Network FEED project based in Abu Dhabi, UAE. Responsibilities extend into providing services - Pipeline route selection - Mechanical design, i.e. wall thickness, preliminary stress analysis, expansion analysis, and free-span analysis - Development of material take-offs - Development of material specifications and data sheets - Preparation of Pipeline FEED scopes of work - Input to FEED schedules and Cost Estimate

Requisition ID

2020-80951

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitlePMC Senior Instrument and Control Engineer

Wood is currently recruiting for a PMC Senior Instrument and Control Engineer with extensive experience in the oil and gas industry to be based on ADNOC Gas Processing - Sales Gas Network FEED project. Successful candidate will be responsible for below duties; - Design and check all Instrument work on assigned projects - Execute assigned work in accordance with the applicable Project Procedures, DDI and Standards, including Project Procedures on Safety and Quality Control, within the man-hour and cost budgets and the project schedule targets - Prepare instrument index - Develop data sheets, instrument sizing, and prepare material requisitions for all instrument items including Control Valves, Relief Valves, Flow elements, Level instruments, Temperature instruments, Analyzers and DCS / ESD / Fire and Gas systems - Review other discipline drawings such as Equipment datasheet - Guide the designers for the preparation of Instrumentation drawings and deliverables - Prepare and check all Instrument drawings / documents and ensure that the quality of design and drawings produced for enquiry and fabrication purposes is of satisfactory standard - Attend coordination meetings and engineering review meetings with supplier as required - Assist Procurement Department with the expediting of supplier documents - Review and approve supplier documents for Instrumentation - Ensure effective & efficient Inter-discipline coordination including coordination with client engineer - Review instrument aspects of package unit supplier’s drawings

Requisition ID

2020-80950

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitlePMC Senior Rotating Equipment Engineer

Wood is currently looking to recruit a PMC Senior Rotating Equipment Engineer to join the client team on ADNOC Gas Processing - Sales Gas Network FEED project. Successful candidate would responsible for below duties and responsibilities; - Review and verification of equipment supplier’s engineering - Assist with specification and selection of suitable rotating machinery - Review of Equipment Technical Material Requisition (Specifications), such as Specification and Mechanical Data Sheets, for Enquiry - Technical evaluation, comparison and clarification of supplier technical bids, plus the technical reports to support order placement - Review of Process Data Sheets and Supplier documentation for integration within Review of Vendor documents as GA / Details / Calculations Procedures - Project technical support – familiarity with risk assessments, design reviews, constructability, HAZOP, etc. - Plan and monitor execution of equipment aspects of projects

Requisition ID

2020-80949

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

Job TitlePMC Senior Process Engineer

Wood is currently looking to recruit a PMC Senior Process Engineers to join the client team on a ADNOC Gas Processing - Sales Gas Network FEED project. Successful candidate would responsible for below duties and responsibilities; - Provide technical expertise on all engineering subject matter pertaining to Process engineering and design - Ensure Process design and engineering compliance with relevant codes, standards and Company standards - Coordinate, Monitor and handle Process design and engineering with EPC contractor as per project expectation and complete the same within the time frame - Perform regular and timely technical reviews of Process engineering deliverables developed by engineering consultants / contractors, ensuring design quality in compliance with relevant codes, standards, and best practices - Ensure integration of overall Process engineering coordination within IPMT other discipline Engineering Team - Review and approval of Engineering Consultant's and EPC Contractor's work and ensure compliance with the project specifications, relevant codes and standards, and best industry practices - Coordinate the required engineering participation in the development and analysis of various design options and business models - Contribute input and expertise in the development and analysis of various design options and business models to design optimization and validation - Participate in teams for equipment sizing / equipment selection considering optimization and standardization - Ensure that the facilities are designed in accordance with the latest corporate guidelines with respect to environment and health aspects - Ensure full utilization of the existing facilities while optimizing the facilities required for the new projects - Participate in layout reviews, model review, design reviews, and technical workshops - Provide technical assistance and coordination with other discipline engineers - Coordinate technical reviews and bid evaluation, and performance evaluation

Requisition ID

2020-80948

Multi-Locations

Country

United Arab Emirates

City

Abu Dhabi

Vacancy Type

Fixed Term

Type of Requisition

Professional & Technical

John Wood Group plc is a multinational energy services company with headquarters in Aberdeen,Get all the information about Wood PLC (Wood), a company operating mainly in the Electric Power, Oil & Gas, Infrastructure and Mining & Metals sector. Connect with its key contacts, projects, shareholders, related news and more