Wood is currently bidding for a major client in Abu Dhabi for 4 months contract with a possibility of an extension. If awarded the work, we will have a requirement for a Lead Pipeline Engineer to join the business.  Please note that at this stage, applications for this role are invited as an Expression of Interest (EOI) whilst opportunities are being fully determined.   Job Description: Client intends to unify the use of standards and specifications across its group of companies, and therefore, require producing new Standard Specifications, with the following objectives: - Standardization across the group will drive Cost Effectiveness, both upfront CAPEX and operating/life cycle costs by eliminating 'Nice to have' requirements and adopting 'Must to have or Fit for purpose' approach. - Enhance interchangeability of materials will lead to Optimized inventory management and maintenance costs, thereby enhancing profitability. - Supports In-Country Value (ICV) initiative. - Enhanced Project Delivery performance (Cost/Time Benefit) Candidate Role: - Review and compare Client’s Specifications across group of companies - Combine and update the same considering the technical requirements, Quality requirements and Cost optimisation in liaison with client and project team - Provide logical and consistent written technical direction relating to respective discipline specifications development. - Liaise with other disciplines in the design team and the Client    

Wood is currently recruiting for a Senior Process Engineer based in Abu Dhabi for a permanent assignment.   Purpose: - Contributing to the delivery of engineering excellence through: - Executing assigned scopes of work. - Supporting and supervising task delegation to team. - Providing process engineering discipline expertise to the business.  Functional Competencies - Technically competent in own discipline and actively maintains own competence according to standards and pursues continuous professional development. - Provide discipline support to the business. - Ensure self-awareness of relevant regulatory framework, legislation changes, initiatives and industry technology developments and promote to direct reports. - Provide discipline input to scope definition and execution. - Deputising for principal as required. - Supporting and supervising tasks delegated to direct reports. - Executing assigned personal objectives - Management of third party suppliers in the execution of Engineering delivery. Responsiblities - Keep informed, by all possible means, of technical developments in process industries and make recommendations to Chief/Principal Process Engineer on methods of improving Wood’s competitive position from a technical standpoint. - Deputise for Chief/Principal Process Engineer as requested.  - Keep Chief/Principal Process Engineer informed as to progress of assigned engineers and their potential for accepting increased responsibility. - Ensure that the requirements of Licensor’s / Client’s Secrecy Agreements are known and complied with in the work performed.  - Review and approve project schedules with the Project Engineer to see that all dates, rates of progress and design periods are realistic. - Advise the Lead / Chief/ Principal Process Engineer of any deviations and their causes and proposed corrective action. - Advise the Lead / Chief/ Principal Process Engineer of any technical problems and unresolved differences with other groups. - Notify the Project Engineer of all deficiencies in the flow of data or other basic information required for execution of work. - Provide information, where necessary, for estimating the cost of contract changes. Alert the Project Engineer / Project Manager to circumstances considered to constitute a contract change. - Carry out simulations of processes using simulation packages (such as ChemCad, Aspen, Pro II, Hysys etc.). Review and check simulations. - Establish the basis of design and make detailed calculations to develop the design and be responsible for the accuracy of these calculations. Check and approve calculations. - Ensure that detail design methods, standards and data used meet the Client’s requirements and/or those issued by Wood. - Prepare process flow diagrams, equipment specifications and process descriptions. Review and approve process flow diagrams, equipment specifications and process - Complete thermal designs / ratings for shell and tube exchangers and air coolers and thermal design data sheets. Review and approve thermal designs. - Prepare process specification for instrumentation and control, including control narratives, for review and approval by the Lead Process Engineer. Review and approve process specifications. - Complete hazardous area classification notes and review area classification drawings. Review and approve hazardous area classification notes. - Prepare comment issue engineering flow diagrams. Review engineering flow diagrams and submit comments to Lead Process / Project Engineer. Prepare contract engineering design (CED’s) documents, as required, to communicate changes / design information - Prepare process summaries and schedules (effluents & emissions, chemicals & catalysts, utilities, battery limits and, relief and blowdown). Review and approve process summaries and schedules. - On request, review Supplier’s quotations from a process engineering standpoint. On order placement, review Supplier drawings and documents and provide comments. - Participate in HAZOP and other safety reviews. - Participate in review of project model. - Prepare operating manuals. - Provide process support to the other engineering disciplines and construction. - Participate in technical sales activities as requested. - Perform such duties as may reasonably be assigned by the Chief / Principal Process Engineer. 

Wood is currently looking to recruit a PMC Interface Specialist to be based in Abu Dhabi, United Arab Emirates working for our client Al Dhafra Petroleum. The successful candidate will be responsible to handle the below responsibilities and duties;   This is a FEED project which is expected to run for approximately 12 months initially with potential opportunity for extension for another 4 – 5 years dependable on award of EPC.   Work scope is onshore oil and gas project; field expansion consisting of (new wells, flowlines, manifolds and tie-ins to existing facilities).   Purpose/Role   To provide expertise and develop coordination capability and act as a member of project teams to undertake assigned tasks.   Key Responsibilities - Contribute to develop / maintain interface management system / procedures - Monitor interface issues between contractors Attend progress or monthly meetings with relevant contractors - Contribute to monthly report and provide interfaces activies updates - Work with project team to address and mitigate interface issues - Expedite outstanding interface issues - Report open and closed interface information - Identify potential interface issues that may result in variation orders - Contribute to training and development of project staff

Wood is currently looking to recruit a Senior Assets Integrity Engineer to be deployed within a client Project Management Team in PMC capacity to assist in the management of a large EPC project.   Responsibilities: - Development of client proposals and scopes of work - Involvement in the development and implementation of asset integrity management (AIMS) programs  - Evaluate asset information to determine hazards, failure modes and risk mitigations - Assessing damage mechanisms in oil and gas industries - Utilise spreadsheet and database tools to capture and manipulate data; identifying trends and equipment health concerns - KPI reporting and performance metric development for system integrity - Develop maintenance strategies using a reliability-centred maintenance approach - Updating Computerised Maintenance Management Systems (CMMS)   - Fitness for service assessment - Setup and configuration of Integrity Management Database Systems - Development of client reports to communicate results and recommendations - Assuming ownership of small projects, managing from start to finish following Wood’s Quality Management System

Wood is currently recruiting for an Construction Lead for it's client ADNOC Offshore to be based on an Island for 6 weeks on 3 weeks off rotation 7 days/ week - 12hrs/day. Below are the main responsibiilties to perform; - Participate in and advise on all mechanical and piping construction activities and initiatives - Responsible for the mechanical and piping scope to ensure the Contractor and sub-contractors perform the work to agreed scope of work, specifications and schedules all to an acceptable standard - Supervise the contractor and sub-contractor personnel to ensure contractor performs all work to agreed standards for safety, health and environment and to attaining high levels of HSE performance - Ensure assigned scope of work is carried out without any significant HSE incidents - Ensure the work is carried out in time and in accordance with scope of work, specification and quality requirement - Promote HSE awareness and ensure that all ADNOC Offshore Project HSE requirements are implemented and adhered to - Responsible for construction mechanical and piping activities through the contractors supervision in respect of HSE, method, working practices, quality and timely execution of the works - Advise mechanical and piping ADNOC Offshore Project staff on best practices - Responsible for the mechanical and piping ADNOC Offshore Project staff aspect of Risk Management to ensure all risks / opportunities are identified and appropriate controls/mitigations developed and implemented - Responsible for mechanical and piping coordination with regard to SIMOPS - Ensure that construction hazards and risks are fully considered by designers and contractors and that appropriate mitigation actions are implemented and appropriate action taken - To be fully familiar with the contractors methods of construction, schedule and procedure - Initiate and manage the mechanical and piping project element of the continuous improvement processes - Monitor site activities for potential contractual / claims problems - Maintain records of site activities and check Contractor records for accuracy - Carry out inspection, surveillance witnessing of contractor activities, ensuring records are maintained, including as-built data - Endorse daily progress report and time sheets - Detailing the work progress, number of contractor personnel and equipment available on site and other related items identified in the scope of work - Manage multi-disciplinary team of around 15 people on island including quality, safety, construction, project controls, engineering and commissioning - Management of all on island work and subcontractors including monitoring and tracking of progress, quality and safety - Management of interfaces with other island Contractors for general construction interface and tie-ins - Primary project point of contact for Operations on island for all issues resolution - Lead safety onsite

Wood is currently recruiting for a PMC ICS Specialist to be based in Abu Dhabi, United Arab Emirates to work with our client Al Dhafra Petroleum. Successful candidate will be responsible for below duties and responsibilities;   This is a FEED project which is expected to run for approximately 12 months initially with potential opportunity for extension for another 4 – 5 years dependable on award of EPC.   Work scope is onshore oil and gas project; field expansion consisting of (new wells, flowlines, manifolds and tie-ins to existing facilities).   - Design and check all Instrument work on assigned projects - Execute assigned work in accordance with the applicable Project Procedures, DDI and Standards, including Project Procedures on Safety and Quality Control, within the man-hour and cost budgets and the project schedule targets - Prepare instrument index - Develop data sheets, instrument sizing, and prepare material requisitions for all instrument items including Control Valves, Relief Valves, Flow elements, Level instruments, Temperature instruments, Analyzers and DCS / ESD / F&G systems - Manage Technical Bid Evaluation of all items - Review Piping Isometric  - Review other discipline drawings such as Equipment datasheet - Guide the designers for the preparation of Instrumentation drawings and deliverables - Prepare and check all Instrument drawings / documents and ensure that the quality of design and drawings produced for enquiry and fabrication purposes is of satisfactory standard - Attend coordination meetings and engineering review meetings with supplier as required - Assist Procurement Department with the expediting of supplier documents - Review and approve supplier documents for Instrumentation - Ensure effective & efficient Inter-discipline coordination including coordination with client engineer - Review instrument aspects of package unit supplier’s drawings

Wood is currently recruiting for PMC Pipeline Specialist for its project with Al Dhafra Petroleum. This role will be based in Abu Dhabi, United Arab Emirates. Successful candidate will perform below duties and responsibilities;   This is a FEED project which is expected to run for approximately 12 months initially with potential opportunity for extension for another 4 – 5 years dependable on award of EPC.   Work scope is onshore oil and gas project; field expansion consisting of (new wells, flowlines, manifolds and tie-ins to existing facilities). - Support the preparation and implementation of effective project execution plans & procedures - Monitor engineering design compliance to the Design Basis - Manage a defined project scope to schedule and budget - Coordinate cross discipline input into procurement and contract technical packages assigned to their area - Monitor design evolution from basic engineering to detail engineering for documents and drawings and mitigate interdisciplinary conflicts - Review discipline progress and performance on a biweekly basis with the area discipline leads and develop action plans with project discipline leads when required - Provide Area Managers with monthly progress and performance write-ups for their area for inclusion in the Project Monthly report - Develop and maintain the area action log that shows decisions and information required to maintain the area schedule - Manage the MOC process for the assigned work scope

Wood is currently recruiting for PMC Mechanical (Rotating Equipment) Specialist for its project with Al Dhafra Petroleum. Role will be based in Abu Dhabi, United Arab Emirates. Successful candidate will be responsible for below duties and responsibilities;   This is a FEED project which is expected to run for approximately 12 months initially with potential opportunity for extension for another 4 – 5 years dependable on award of EPC.   Work scope is onshore oil and gas project; field expansion consisting of (new wells, flowlines, manifolds and tie-ins to existing facilities).   - Review and approve mechanical data sheets of rotating equipment and technical bid evaluation done by EPC contractor for rotating equipment - Review and approve vendor documentation of rotating equipment as required per ITB - Assist project by providing answers to EPC contractor’s waiver requests and RFI’s related to rotating equipment - Contribute and be involved in design, engineering, P&ID reviews, HAZOPs, HAZANs and safety reviews

Wood is currently seeking to recruit a PMC Process Specialist to be based in Abu Dhabi, United Arab Emirates to work with our client Al Dhafra petroleum. The successful candidate will be responsible for below responsibilities and duties;   This is a FEED project which is expected to run for approximately 12 months initially with potential opportunity for extension for another 4 – 5 years dependable on award of EPC.   Work scope is onshore oil and gas project; field expansion consisting of (new wells, flowlines, manifolds and tie-ins to existing facilities). - Ensuring client requirements for applicable work package are incorporated into the process design by the EPC contractor - Reviewing and approving process engineering technical deliverables produced by EPC contractor for applicable work package in line with PMC Technical Assurance Plan - Providing PMC / PMT input at EPC contractor led technical and safety design review meetings - Ensuring adherence to project scope criteria as defined in project management plan (including budget / schedule), and bringing to project management attention any project activities impacting upon these - Planning, monitoring, and reporting progress for process engineering activities undertaken including obtaining resources from home office as required - Managing direct line reports on day to day basis - Liaison and interfacing with other engineering discipline leads and project functions

Wood is currently recruiting for a PMC Project Control Specialist to join our team in Abu Dhabi, UAE to work on Al Dhafra Petroleum project. The successful candidate must be able to perform the below duties and responsibilities;    This is a FEED project which is expected to run for approximately 12 months initially with potential opportunity for extension for another 4 – 5 years dependable on award of EPC.   Work scope is onshore oil and gas project; field expansion consisting of (new wells, flowlines, manifolds and tie-ins to existing facilities).   - Control, supervise, monitor and guide the day-to-day activities of the Planning and Control team - Supervise in delivering the resourced robust baseline project schedules (team size dependent) - Oversee the co-ordination and production of all project plans and associated documents (‘S’ Curves, Histograms, Tabulated man hour / progress data) - Provide the Management Team with the relevant contract information - Ensure that all services and deliverables conform to Company, Client and Project QA Plan, policies, requirements and standards - Read, understand and implement the Company Safety Policy and the arrangements described in the Company and area Safety Management System documents in relation to the Planning function - Promote good working relations within the Project Controls Teams and other project departments and client representatives - Ensure all planning work is carried out in compliance with Corporate and Project specific procedures - Control, directly supervise, monitor and guide the day-to-day activities of the Planning team - Supervise the production of resourced robust baseline project schedules - Oversee the co-ordination and production of all project plans and associated documents (‘S’ Curves, Histograms, Tabulated man hour / progress data) - Ensure the timely issue of updated plans and associated documents accurately at the agreed intervals - Liaise and interface with the Client Project Control Manager and Contract Manager on all relevant matter - Ensure that the Project Controls Manager / Project Manager / Project Engineers are aware of all planning issues - Liaise with the project team and planners to resolve conflicts - Carry out planning team competency assessment and development - Carry out all Personal Development Reviews for relevant staff members - Report at a contract level to the Management Team - Work with the Risk Team on any plans which require to be risked - Provide proposal support as required

Wood is currently recruiting for a Contract Manager to oversee the overall contract management and provide the necessary support to the client in the management of the contractual issues.   The PMC Contract Manager will be report to the Project Director and will maintain direct contact with the Clients Contract team.   The project period is approximately for 2-3 years, including both EPC design review phase and construction phase. - Collaborate with the client in any matter requiring assistance with contracts - Be well informed of the development of the Project and the status of Contract Changes for the Project under execution. S/He will attend periodic project reviews to be informed of the project status at all times - Analyze Site claims and / or Contract Changes open against the Client by the EPC contractor and coordinate with the Client the appropriate response - Provide support to the Project Director in the necessary presentation, updating and negotiations until the resolution of the site claim and / or Contract Change - Provide the necessary support to Project Director to conveniently document the actions or activities that contractually require it - Actively participate, in coordination with relevant Project specialists, in any changes required in the contracts - Provide support in the contractual close out of each Project subcontractor in areas such as, e.g., refund / extension of guarantees, payment / collection of outstanding invoices, issuance of Acceptance Certificates, Mechanical Completion, etc. - Provide support to the Procurement Team in negotiations with suppliers or subcontractors - Organize the assessment and technical coordination of Contract Changes - Ensure the coordination of specialists in the review of Site Claims and / or Contract Changes - Monitor and keep records of the Client’s Project correspondence and refer it to the appropriate department to respond and take necessary actions - At site, receive the Claims of the Site Subcontractor to the Client and potential Contract Changes, and verify compliance with the contracts, the estimate of the Contract Change, and monitor the time of response time to the claim Please note that at this stage, applications for this role are invited as an Expression of Interest (EOI) whilst opportunities are being fully determined.